Filteren op:

Gemiddelde scores

  • In totaal
  • Gebruiksgemak
  • Klantenservice

Over FactoryTalk

Het uitgebreide portfolio van InnovationSuite brengt edge-to-enterprise-analyse, machine learning, IIoT en augmented reality naar industriële bedrijven.

Meer informatie over FactoryTalk

17 reviews worden weergegeven

Jhon jairo V.
Jhon jairo V.
Student Researcher in Puerto Rico
Geverifieerde LinkedIn-gebruiker
Heeft de software gebruikt voor: 6-12 maanden
Bron van de reviewer

human machine interface design software

5 4 jaar geleden

Pluspunten:

This allows import of images for construction of animations for the design of the interface, is user friendly, allows different protocols of industrial communications

Minpunten:

This is too expensive, the acquisition of the software is allowed by the purchase of this and not by the purchase of equipment. Training is expensive should integrate the system

Russell W.
System Engineer in VS
Industriële automatisering, 51-200 werknemers
Heeft de software gebruikt voor: 2+ jaar
Bron van de reviewer

FactoryTalk Suite

5 3 jaar geleden

Opmerkingen: I have had good luck with the software and with all the documentation. I have had spotty luck with the support team. More times than not they can get to the source of the problem right away, but occassionally you seem to get someone who appears to have not had much real life use of the products.

Pluspunten:

I appreciate that the FactoryTalk suite can integrate data from the plant floor to a high level manager. I can easily gather data via FactoryTalk Linx and push it to my displays in FactoryTalk View SE, my historian in FactoryTalk Historian SE, and even to reports via VantagePoint. The HMI is easy to use and I like how everything integrates more or less seamlessly.

Minpunten:

The View SE displays can use some higher quality (vector based) graphics. The graphics engine is a little old and needs some reworking. Also, some basic integration of database calls and tabular data in the HMI is missing without the engineer doing quite a bit of work or relying on third party active-x controls.

Dustin Z.
engineer in VS
Computersoftware, 501-1.000 werknemers
Heeft de software gebruikt voor: 2+ jaar
Bron van de reviewer

very useful

3 3 jaar geleden

Opmerkingen: use on programming water plants

Pluspunten:

is useful but the only one my company use

Minpunten:

ir cratches all the time , causing delays in my work

Chris D.
Chris D.
Principal Engineer, Global Reliability in VS
Geverifieerde LinkedIn-gebruiker
Consumentengoederen
Heeft de software gebruikt voor: 2+ jaar
Bron van de reviewer

FactoryTalk VantagePoint is powerful access to industrial data

4 4 jaar geleden

Opmerkingen: Fast access to all manufacturing data across the entire company

Pluspunten:

The key to FactoryTalk VantagePoint is to treat all data as time series "tag" data when setting up connectors. Being able to quickly grab any tag across the entire company and drop it on a trend chart or bring it into Excel is very powerful. The application can connect to all major industrial historians as well as any SQL or Oracle database. This gives you access to just about any data available.

Minpunten:

The best features of the product are not well exposed and are not as user friendly. For example, the ability to finesse a data set within the Excel Add-in is called Post-SQL processing, hidden deep within the wizard, and requires knowledge of SQL as well as undocumented syntax to refer to columns.

Sergio A.
Sergio A.
Project Manager in Puerto Rico
Industriële automatisering, 51-200 werknemers
Heeft de software gebruikt voor: 2+ jaar
Bron van de reviewer

The best tool set in the automation market compared to all the automation brands

5 4 jaar geleden

Opmerkingen: Complete control of your productive plant.

Pluspunten:

This is a complete sotware set of tools for implement the automation projects and manage the operations, process and business of the company. Works perfect and give you the best benefits if you integrate this software with the hardware of the same brand. The cost compared to others companies is very competitive.

Minpunten:

The initial configuration of the software is not as intuitive and easy as you can desire, because depends to much of specific configurations of Windows OS.

Geverifieerde reviewer
Mix-Laboratory Chemist in VS
Geverifieerde LinkedIn-gebruiker
Bouwmaterialen, 51-200 werknemers
Heeft de software gebruikt voor: 2+ jaar
Bron van de reviewer

FactoryTalk

4 3 jaar geleden

Opmerkingen: Working as an operator in a manufacturing plant, our systems interface is done using FactoryTalk software and overall it has been a very positive experience.

Pluspunten:

The end user interface is limited only by the programmer’s capability and skill set.

Minpunten:

As the end user, the weaknesses of the interface can be magnified by the programmer and their knowledge of the factory or processes being controlled.

Geverifieerde reviewer
Information Manager in VS
Geverifieerde LinkedIn-gebruiker
Automotive
Heeft de software gebruikt voor: 2+ jaar
Bron van de reviewer

I use FactoryTalk to create displays for our manufacturing machines used by operators and managers.

4 3 jaar geleden

Pluspunten:

Works well with other Rockwell products, machine controllers and drivers. It works better than their competitor products.

Minpunten:

Some portions are more complex than they should be such as the setup and configuration. I have to configure multiple parts for it to work properly, such as the communication, human machine interface, and server setup.

Alberto B.
Enginner in Colombia
Mijnbouw en metalen, 1.001-5.000 werknemers
Heeft de software gebruikt voor: 2+ jaar
Bron van de reviewer

It's a great family of tools for automation industry.

5 3 jaar geleden

Opmerkingen: Experience

Pluspunten:

With this family of tools you can do whatever you want in automation. They have HMI software, Asset Control software, Historian Software and a lot more.

Minpunten:

You need a license for everything you want. So once you have a software and need to upgrade you need to pay more and more

Geverifieerde reviewer
Ingeniero de Automatización y Control in Venezuela
Geverifieerde LinkedIn-gebruiker
Heeft de software gebruikt voor: 2+ jaar
Bron van de reviewer

My experience with these applications have been one of the best stages of my life. Easy, fast and ma

5 3 jaar geleden

Pluspunten:

What I like about these applications is that they are easy to use, they are very robust, they have redundancy and they are guaranteed in all their products. One of the best brands in applications of industrial automation are those of rockwell automation.

Minpunten:

There really is nothing to complain about products. The only thing is that it is very expensive but expensive things should be better in all their appearance.

Jairo M.
Electrical Maintenance Engineer in VS
Entertainment, 51-200 werknemers
Heeft de software gebruikt voor: 2+ jaar
Bron van de reviewer

Full Automation and PLC Tools

5 3 jaar geleden

Opmerkingen: Amazing, just remember that a Dot "." or a coma "," may save or kill you Migration, be very careful on each Component, PLC, CPU and network adapters VERSIONS.

Pluspunten:

It has many different sub categories, like HMI programming, PLC troubleshooting, Networks diagnostics and setup. My expertise comes to the HMI developing, with i might say its very gratifying to program on Factorytalk View M.E.

Minpunten:

it takes a while to get to know all the perks.

Brittany P.
Engineer in VS
Nutsbedrijven, 201-500 werknemers
Heeft de software gebruikt voor: 2+ jaar
Bron van de reviewer

Experience is across many people

4 3 jaar geleden

Opmerkingen: Keeping our system on Factory talk helps with having a cohesive network.

Pluspunten:

Factory Talk keeps everything under one roof. It's helpful to have training, PLC programs, VFD programs, and panelviews under one bracket. If you're already familiar with programming, this will be a good program to know especially if working in the US.

Minpunten:

Support personnel from Rockwell on a few accounts could not answer technical questions. Including questions about equipment that has been running for 20+ years. They will call someone else or edit it how they normally do it instead of trying to help understand what your business or company needs.

Giuseppe D.
Electrical engineer in Italië
Levensmiddelen- en drankenindustrie, 5.001-10.000 werknemers
Heeft de software gebruikt voor: 2+ jaar
Bron van de reviewer

Grapichal pages for HMI in Food and Beverage industriy

4 3 jaar geleden

Opmerkingen: connection with all Rockwell devices is easy

Pluspunten:

It's so good the enviroment and the interface. Quite clear how to connect Tags to PLC and good to have possibilties with Recipes.

Minpunten:

Grapichally it is limited, not a lot of draw. Hard to use the drag and drop. Zoom are not so good. Little bit complex to involve it in the system (set the network and the links with other devices).

Alvin B.
Graduate Student of Master of Science in Puerto Rico
Mijnbouw en metalen, 5.001-10.000 werknemers
Heeft de software gebruikt voor: 2+ jaar
Bron van de reviewer

Excellent platform for the automation of industrial plants and production process.

5 4 jaar geleden

Opmerkingen: Troubleshooting problems in a automated process

Pluspunten:

Rockwell Automation software like RSLogix5, 500 or 5000 offer an easy way to program and troubleshoot a problem following rung sequence in the ladder file

Minpunten:

Factory Talk should have better training packages for companies. Engineers know about one or two software but not about the whole platform.

Dirk V.
Dirk V.
Engineer in Nederland
Informatietechnologie en -diensten, Zelfstandig ondernemer
Heeft de software gebruikt voor: 2+ jaar
Bron van de reviewer

Forced to use, but with pleasure

5 2 jaar geleden

Pluspunten:

This software is designed to design and engineer Rockwell HMI systems windows based. It fits the purpose, and is the best you can get.

Minpunten:

The interface is a bit outdated, and the functionality must be completed with VBA code. Not too professional

Geverifieerde reviewer
Research Assistant in Puerto Rico
Geverifieerde LinkedIn-gebruiker
Hoger onderwijs
Heeft de software gebruikt voor: 1+ jaar
Bron van de reviewer

Great automation software

5 3 jaar geleden

Opmerkingen: Great automation tools

Pluspunten:

Is one of the most popular software in automation industry, have great features of PLC and third party devices.

Minpunten:

Rockwell could improve the technical support in this software, because the installations and configuration are difficult.

Geverifieerde reviewer
Asistente de Docencia in Colombia
Geverifieerde LinkedIn-gebruiker
Computersoftware, 1.001-5.000 werknemers
Heeft de software gebruikt voor: 6-12 maanden
Bron van de reviewer

An embedded platform for factory monitoring

5 2 jaar geleden

Pluspunten:

Rockwell Automation is a very common supplier of automation equipment for industries. Factory Talk is a platform that can be easily integrated with PLCs, sensors and actuators to monitor and control the production process. It ensures compatitibility with the other equipments and its learning curve for the machine operators is easy.

Minpunten:

It is a quite expensive software. Also, the user interface is not user friendly.

Bruno O.
VS
Heeft de software gebruikt voor: Niet verstrekt
Bron van de reviewer

Excellent product

4 5 jaar geleden

Opmerkingen: We use it all the time. Would you it with more customers if it was less expensive. It works great with PlantPAX.